Change P410i from HBA mode to Raid mdoe

fs0:\> dir
Directory of: fs0:\
  03/07/13  10:44a            1,492,736  0126.bin
  03/07/13  10:44a                  953  fwupdate.nsh
  03/07/13  10:44a            4,194,304  sandman_578b0.bin
  03/07/13  10:44a              452,096  saupdate.efi
  12/03/12  10:12a               12,792  .psafe3
  03/07/13  10:38a <DIR>          4,096  .Trash-500
          5 File(s)   6,152,881 bytes
          1 Dir(s)

fs0:\> fwupdate.nsh
fwupdate.nsh> echo -off


********************************************************************************
****                                                                        ****
****                        IO CARD FIRMWARE UPDATE                         ****
****            (c) Copyright Hewlett-Packard Company, 2001-2012            ****
****                          All rights reserved.                          ****
****                                                                        ****
****                                                                        ****
********************************************************************************

Installing Firmware Update for SAS Card ...
 Updating controller in Seg: 0, Bus: 2, Dev: 0, Func: 0
 Current firmware version 5.06  Build 0
     Percentage completed: 100%
     Activating firmware now, this may take several minutes.
     Resetting and reinitializing controller.
     Retrieving firmware version, this may take several minutes.
 Current controller firmware version is 5.78 Build 0
Completed installing Firmware Update for SAS Card !

System will reboot now, Please wait ...

fs2:\> saupdate get_mode hba
 No matching controller/enclosure found!
fs2:\> saupdate get_mode all
The controller at 0:2:0:0 is in HBA mode
fs2:\> saupdate set_mode 0:2:0:0 raid
WARNING:Changing controller mode could result in DATA LOSS!!!
Key in 'YES' to continue or 'NO' to quit:yes
Changing mode of the controller at 0:2:0:0 to RAID
Resetting and reinitializing controller,it may take several minutes
Controller mode change successful
fs2:\> reconnect -r

HP Smart Array P410i Controller     (version 5.78)  0 Logical Drives
Currently the controller is in RAID mode                                   
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected                 
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected                 
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.20, firmware 5.03.002) 
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.20, firmware 5.03.002) 
ReconnectController(0,0,0) : Status = Success
fs2:\> drivers
            T   D
D           Y C I
R           P F A
V  VERSION  E G G #D #C DRIVER NAME                         IMAGE NAME
== ======== = = = == == =================================== ===================
16 0000000A B - -  1 51 PCI Bus Driver                      PciBusDxe
1A 00000014 B - -  1  1 Serial 16550 Driver                 Serial
68 00000001 ? - -  -  - ICH Serial ATA Controller Initializ SataControllerDxe
6E 0000000A ? - -  -  - AHCI Bus Driver                     AhciDxe
6F 0000000A D - -  2  - Platform Console Management Driver  ConPlatformDxe
70 0000000A D - -  2  - Platform Console Management Driver  ConPlatformDxe
71 0000000A B - -  2  2 Console Splitter Driver             ConSplitterDxe
72 0000000A B - -  1  1 Console Splitter Driver             ConSplitterDxe
73 0000000A ? - -  -  - Console Splitter Driver             ConSplitterDxe
74 0000000A B - -  2  2 Console Splitter Driver             ConSplitterDxe
75 0000000A ? - -  -  - Console Splitter Driver             ConSplitterDxe
78 0000000A ? - -  -  - UGA Console Driver                  GraphicsConsoleDxe
79 0000000A B - -  1  1 Serial Terminal Driver              TerminalDxe
7A 0000000A D - -  1  - VGA Class Driver                    VgaClassDxe
7B 00000000 D - -  1  - PCI VGA Mini Port Driver            VgaMiniPort
7C 0000000A D - -  2  - Generic Disk I/O Driver             DiskIoDxe
7F 0000000A D - -  1  - FAT File System Driver              Fat.efi
81 0000000A D - -  1  - SCSI Bus Driver                     ScsiBus
82 0000000A ? - -  -  - Scsi Disk Driver                    ScsiDisk
83 00000030 ? - -  -  - Scsi Tape Driver                    ScsiTape
84 0000000A B - -  1  1 Partition Driver(MBR/GPT/El Torito) PartitionDxe
85 0000000A B - -  4  3 Usb Bus Driver                      UsbBusDxe
86 0000000A D - -  1  - Usb Keyboard Driver                 UsbKbDxe
87 00000011 D - -  1  - Usb Mass Storage Driver             UsbMassStorageDxe
88 0000000A D - -  1  - Usb Mouse Driver                    UsbMouseDxe
89 00000020 D - -  3  - Usb Uhci Driver                     UhciDxe
8A 00000030 D - -  1  - Usb Ehci Driver                     EhciDxe
8C 0000000A D - -  4  - Simple Network Protocol Driver      SnpDxe
8D 0000000A B - -  4 12 MNP Network Service Driver          MnpDxe
8E 0000000A B - -  4  4 ARP Network Service Driver          ArpDxe
8F 0000000A B - -  4 32 IP4 Network Service Driver          Ip4Dxe
90 0000000A D - -  4  - IP4 CONFIG Network Service Driver   Ip4ConfigDxe
91 0000000A B - - 24 20 UDP Network Service Driver          Udp4Dxe
92 0000000A B - -  4  4 DHCP Protocol Driver                Dhcp4Dxe
93 0000000A B - -  8  4 MTFTP4 Network Service              Mtftp4Dxe
94 0000000A D - - 24  - UEFI PXE Base Code Driver           UefiPxeBcDxe
95 0000000A D - -  4  - Tcp Network Service Driver          Tcp4Dxe
96 0000000A ? - -  -  - iSCSI Driver                        IScsiDxe
99 00000338 D X X  1  - Smart Array SAS Driver v3.38        MemoryMapped(0xB,0x
9B 00050253 B X X  1  1 Broadcom 10 Gigabit Ethernet Driver MemoryMapped(0xB,0x
9D 00050253 B X X  1  1 Broadcom 10 Gigabit Ethernet Driver MemoryMapped(0xB,0x
9F 00050253 B X X  1  1 Broadcom 10 Gigabit Ethernet Driver MemoryMapped(0xB,0x
A1 00050253 B X X  1  1 Broadcom 10 Gigabit Ethernet Driver MemoryMapped(0xB,0x
A3 00000220 D X X  1  - HP Fibre Channel Driver             MemoryMapped(0xB,0x
A5 00000220 D X X  1  - HP Fibre Channel Driver             MemoryMapped(0xB,0x
fs2:\> drvcfg
Configurable Components
  Drv[A3]  Ctrl[C6]  Lang[en-US]
  Drv[A5]  Ctrl[C7]  Lang[en-US]
  Drv[9B]  Ctrl[C0]  Lang[en-US;eng]
  Drv[9D]  Ctrl[C1]  Lang[en-US;eng]
  Drv[9F]  Ctrl[C3]  Lang[en-US;eng]
  Drv[A1]  Ctrl[C4]  Lang[en-US;eng]
  Drv[99]  Ctrl[BE]  Lang[eng]
fs2:\> drvcfg -s 99 be
Set Configuration Options
  Drv[99]  Ctrl[BE]  Lang[eng]
 Option Rom Configuration for Arrays, version  3.38                            
 Copyright 2009 Hewlett-Packard Development Company, L.P.                      
 Controller: HP Smart Array P410i                                              
                                                                               
Shell> map -r
Device mapping table
  fs0     :Removable HardDisk - Alias hd53d0b blk0
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(1,MBR,0x00000000)
  fs1     :Removable CDRom - Alias cd53b0a blk1
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x1,0x0)/CDROM(0x0)
  blk0    :Removable HardDisk - Alias hd53d0b fs0
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(1,MBR,0x00000000)
  blk1    :Removable CDRom - Alias cd53b0a fs1
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x1,0x0)/CDROM(0x0)
  blk2    :Removable CDRom - Alias (null)
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x1,0x0)/CDROM(0x1)
  blk3    :Removable BlockDevice - Alias (null)
           PcieRoot(0x30304352)/Pci(0x2,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)
  blk4    :Removable BlockDevice - Alias (null)
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x1,0x0)
  blk5    :Removable BlockDevice - Alias (null)
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x3,0x0)
  hd53d0b :Removable HardDisk - Alias fs0 blk0
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(1,MBR,0x00000000)
  cd53b0a :Removable CDRom - Alias fs1 blk1
           PcieRoot(0x30304352)/Pci(0x1D,0x7)/USB(0x1,0x0)/CDROM(0x0)
fs1:\> fs1:
fs1:\> install
(C) Copyright 1999-2011 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF  --  Revision 2.044
Press Any Key to interrupt Autoboot
\AUTO ==> boot :IINSTALL
Seconds left till autoboot -   0
AUTOBOOTING...> System Memory = 65434 MB
loading section 0
........................................................................................................................... (complete)
loading section 1
................................................. (complete)
loading symbol table                                                                               
                                                   

Comments

Post a Comment

Popular posts from this blog

VIOS TIPs

HMC image locates: /extra/viosimages/2.2.3.4 To install VIO server from HMC: installios To erase the previous setting: installios -u hscroot@P7504HMC:~> cat /etc/nimol.conf # nimol.conf file NIMOL_SERVER 9.22.217.30 ORIGINAL_FILES_DIR /var/tmp/nimol_original RPCBIND_STARTED yes NFS_STARTED yes REMOTE_ACCESS_METHOD /usr/bin/rsh NIMOL_TFTPBOOT /tftpboot TFTP_ENABLED yes REMOTE_SYSLOG_ENABLED yes HMC_SYSLOG_CONF_MODIFIED yes NIMOL_SYSLOG_FACILITY local2 NIMOL_SUBNET 9.22.217.0 NIMOL_BOOTREPLYD yes LABEL default1 /extra/default1 processing hscroot@P7504HMC:~>  installios -F -e -R default1 Logging session output to /tmp/installios.24173.log. nimol_config WARNING: error from command /bin/awk nimol_config MESSAGE: Executed /usr/sbin/exportfs -ua. nimol_config MESSAGE: Executed /usr/sbin/exportfs -a. nimol_config MESSAGE: Removed /tftpboot/default1.chrp.mp.ent. nimol_config MESSAGE: Removed /extra/default1. nimol_config MESSAGE: Removed "LABEL def...
Read more

Configure Solaris 10 LDOM on Solaris 11.4

root@comglv1:~# ldm add-memory 16G htcsun1 root@comglv1: # zfs destroy zones cannot destroy 'zones': operation does not apply to pools use 'zfs destroy -r zones' to destroy all datasets in the pool use 'zpool destroy zones' to destroy the pool itself root@comglv1: # zfs destroy -r zones root@comglv1: # zpool create LDOM mirror c0t5000CCA03C0E89D8d0s0 c0t5000CCA03C2F3BB4d0s0 root@comglv1: # zfs create LDOM/htcsun1 root@comglv1: # zfs create -V 150g LDOM/htcsun1/disk0 root@comglv1: # ldm rm-vdisk vdisk0 htcsun1 root@comglv1: # ldm rm-vdsdev htcsun1-vd0@primary-vds0 root@comglv1: # ldm rm-vdsdev  vol0@primary-vds0 root@comglv1: # ldm rm-vdsdev iso@primary-vds0 root@comglv1: # add-vdsdev options=ro sol-10-u11-ga-sparc-dvd.iso htcsun1-iso@primary-vds0 root@comglv1: # ldm add-vdsdev /dev/zvol/dsk/LDOM/htcsun1/disk0 htcsun1-vd0@primary-vds0 root@comglv1: # ldm add-vdisk vdisk0 htcsun1-vd0@primary-vds0 htcsun1...
Read more

HA in Linux is pretty easy

NOTICE: -- Very important: Please do NOT FAT FINGER. Check your IP address/hostname correct first before configuring PCS. If any service(s) do(es) not startup correctly, please check the service log under /var/log/cluster or /var/log/pcsd. systemctl -xe does not help at all 1> Install PCS  yum isntall pcs -y 2>  Configure PCS. Please run the following commands on ALL nodes: systemctl start pcsd systemctl enable pcsd passwd hacluster 3> Configure PCS, Run he following commands on ONE node: pcs cluster auth <NODE-1> <NODE-2> <...> pcs cluster setup --name <CLUSTER_NAME> <NODE-1> <NODE-2> <...> pcs cluster start --all pcs cluster enable --all pcs resource create virtual_ip ocf:heartbeat:IPaddr2 ip=<IP_ADDR> cidr_netmask=32 op monitor interval=30s pcs resource create <APPLICATION_MON> ocf:heartbeat:nginx configfile=/etc/nginx/nginx.conf op monitor timeout="5s" interval="5s"  ...
Read more