VIOS upgrade


Copy the ISO first

$ oem_setup_env
# cd /var/vio/VMLibrary
# loopmount -i H07786312.iso -o "-V cdrfs -o ro" -m /mnt
# exit
$ updateios -accept -install -dev /mnt


Comments

Anonymous said…
How to Make a Vegas-like Casino (with a Budget)
Las Vegas-style casinos offer the gamblers a large selection of 평택 출장안마 options 통영 출장샵 for their If you 창원 출장안마 are 오산 출장샵 looking 서귀포 출장마사지 for a casino that offers over 200 gaming options,
March 4, 2022 at 6:32 AM
Post a Comment

Popular posts from this blog

Configure Solaris 10 LDOM on Solaris 11.4

root@comglv1:~# ldm add-memory 16G htcsun1 root@comglv1: # zfs destroy zones cannot destroy 'zones': operation does not apply to pools use 'zfs destroy -r zones' to destroy all datasets in the pool use 'zpool destroy zones' to destroy the pool itself root@comglv1: # zfs destroy -r zones root@comglv1: # zpool create LDOM mirror c0t5000CCA03C0E89D8d0s0 c0t5000CCA03C2F3BB4d0s0 root@comglv1: # zfs create LDOM/htcsun1 root@comglv1: # zfs create -V 150g LDOM/htcsun1/disk0 root@comglv1: # ldm rm-vdisk vdisk0 htcsun1 root@comglv1: # ldm rm-vdsdev htcsun1-vd0@primary-vds0 root@comglv1: # ldm rm-vdsdev  vol0@primary-vds0 root@comglv1: # ldm rm-vdsdev iso@primary-vds0 root@comglv1: # add-vdsdev options=ro sol-10-u11-ga-sparc-dvd.iso htcsun1-iso@primary-vds0 root@comglv1: # ldm add-vdsdev /dev/zvol/dsk/LDOM/htcsun1/disk0 htcsun1-vd0@primary-vds0 root@comglv1: # ldm add-vdisk vdisk0 htcsun1-vd0@primary-vds0 htcsun1...
Read more

VIOS TIPs

HMC image locates: /extra/viosimages/2.2.3.4 To install VIO server from HMC: installios To erase the previous setting: installios -u hscroot@P7504HMC:~> cat /etc/nimol.conf # nimol.conf file NIMOL_SERVER 9.22.217.30 ORIGINAL_FILES_DIR /var/tmp/nimol_original RPCBIND_STARTED yes NFS_STARTED yes REMOTE_ACCESS_METHOD /usr/bin/rsh NIMOL_TFTPBOOT /tftpboot TFTP_ENABLED yes REMOTE_SYSLOG_ENABLED yes HMC_SYSLOG_CONF_MODIFIED yes NIMOL_SYSLOG_FACILITY local2 NIMOL_SUBNET 9.22.217.0 NIMOL_BOOTREPLYD yes LABEL default1 /extra/default1 processing hscroot@P7504HMC:~>  installios -F -e -R default1 Logging session output to /tmp/installios.24173.log. nimol_config WARNING: error from command /bin/awk nimol_config MESSAGE: Executed /usr/sbin/exportfs -ua. nimol_config MESSAGE: Executed /usr/sbin/exportfs -a. nimol_config MESSAGE: Removed /tftpboot/default1.chrp.mp.ent. nimol_config MESSAGE: Removed /extra/default1. nimol_config MESSAGE: Removed "LABEL def...
Read more

Solaris 11 Network

Quote from SUN Doc. Oracle Solaris 11 uses profile-based network configuration, which is comprised of two network configuration modes: manual (fixed) and automatic (reactive). Depending on which network configuration mode you choose during an installation, either the DefaultFixed network configuration profile (NCP) or the Automatic NCP is activated on the system. If the DefaultFixed NCP is active, the network is manually configured by using the dladm and ipadm commands . If the Automatic NCP or a user-defined NCP that you previously created is active, the netcfg and netadm commands (formerly nwamcfg and nwamadm ) are used to create and manage network configuration. To determin either eanual or automatic, to run the following command: Note that in this example, a user-defined Location profile called myloc is also online. When using automatic network configuration, at least one NCP and one location must be active on the system at all times. $ netadm list TYPE...
Read more